ADIC DLT 7000 Especificaciones descargar pdf (Pagina 37)

Operation and Maintenance 27

Caution

Removal of the wrong power supply can threaten the security of stored

data. Use the indicators on the rear panel of the T5 to be certain that the

correct power supply is being removed.

Power Supply Removal

Follow this procedure below to remove a power supply module.

1. Unfasten the three captive screws that retain the supply module in the chassis. Refer to Figure 3-1 for

the location of these screws.

Figure 3-3 Power Supplies

2. Use the handle on the module to pull the supply assembly from the chassis. The module docking

connector will disengage from the chassis connector.

3. Replace the power supply module as soon as possible and make sure that the module connector mates

firmly with the chassis connector.

4. Reattach the three captive screws to secure the supply module.

Fan Removal

Follow this procedure to remove and replace a chassis-mounted fan. The power supply fans are an integral

part of the power supply modules and are not field-replaceable.

Power Supply

Captive Retaining

Screws

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 45 46

Sin comentarios

ADIC DLT 7000 Especificaciones Pagina 37